WARNING: This page has not been updated since the Wide Field Upgrade and is no longer maintained.



HET Phase II Target Generator

Col
#
Description Value Notes
1 Blank Blank For RA use
2 Object Status PI should submit as either active or on hold
3 Program
Number
-- Year-Trimester-Program #
4 Object
Name
No spaces (use e.g. underline)
5 Azimuth
Restriction
Primarily for MOS or moving targets.
Tells RA which track to observe target.
6 Right
Ascension
::
7 Declination ::
8 Equinox
9 V Magnitude
10 Position
Angle
Measured from N through E, in degrees.
For default PA use par (parallactic) not zero.
11 Priority Given to you by the TAC
12 RA Priority
Modifier
Blank
13 Setup _
_ _
_ _ _ _ _ _ _
14 Seeing
Limit
Maximum delivered FWHM
15 Sky
Brightness
V-band sky brightness, faintest 21.0 mag
16 Sky
Transparency
Transmission > 0.9 ; or 0.5 ; or 0.2
17 Integration
Time
In seconds
18 CRsplit Number of sub-exposures into which
to subdivide the integration time
19 Visits Number of separate visits to object
20 Done 0 Leave as 0, updated by RA
21 Moving
Target?
Do not omit
22 Synoptic
Frequency
RAND- Frequency of visits in days.
Leave blank for non-synoptic targets.
e.g. RAND1-4: Visit every 1-4 days.
23 Synoptic
Dates
= for on date, > for on or after date.
Date in UT. Leave blank if not needed.
24 Group ID For all targets in a group.
Leave blank if ungrouped.
25 Standard
Calibrations?
Want at least the standard cals?
(Request added cals below.)
26 Flux
Standard
Requested, and what quality?
e.g. 3 => flux standard quality 3 or better.
27 Radial Velocity
Standard
Requested, and what quality?
e.g. 3 => rvel standard quality 3 or better.
28 Telluric
Standard
Requested?
29 Skyflat Requested?
30 Comments Short with crucial real-time information first.
No spaces unless all within quotes.

(as of Nov-2022 these buttons have been disabled - contact HET operations staff for any assistance required)