MARS/HEFI System

 

 

Open MARS GUI and support windows on Monitor 3.

 

 

 

  1. Open WorkSpace menu and select MARS-HEFI>Start Mars-Hefi System.

                The MARS GUI will appear as well as the MARS Camera Control used to take images

                 of the stack.  An SAOImage GUI also opens. Minimize this window.  And a MARS

                 GUI Pre-Alpha will appear. Minimize this window.

 

 

  1. The lower portion of the MARS GUI displays several ON/OFF buttons.  Locate the Wavescope

option and press the On button.  This must be turned on before the Wavescope software is brought online from the Frijole monitor.

 

 

  1. From the WorkSpace menu open “HEFI Light  Source” & “HEFI Interface”.  Both are found in

the MARS-HEFI submenu.

 

 

  1. Next press button #1 on KVM Switch panel located on equipment rack.  The Wavescope screen

should appear on the Frijole monitor.  If you do not see this press “Cntrl” and “~” simultaneously.

A blue screen menu will display a choice of computer screens to view. Select “Wave”. 

From this screen double click on Wavescope icon.  This should bring up the software.

 

 

This concludes night time setup of MARS/HEFI System.