Calscreen Check (11/04/04)
1.0 Test the operation of the
calibration screen.
1.1 Ensure that the dome audio
system is set so that the calscreen petals can be heard.
1.2 Go to the RA station. The calibration screen control box is located
on the equipment
rack just below and to the right of the KVM Switches
panel.
1.3 Flip the Calibration Screen
Switch to the ‘IN’ position. The petals
can be heard over the audio system as they fall into place.
1.4 Flip the switch to the ‘OUT’
position. A release of high pressure air
can be heard.