Version 5 (modified by admin, 4 years ago) (diff) |
---|
LRS2 and Virus (camra) Procedures
- Installing new spectrograph configuration files
- When the spectrograph arrives on site, verify the spectrograph unit number and the controller number.
- In your working copy of trunk, do svn up.
- Check in the directory ./camra/etc/ to verify that the configuration files have been checked in. The files should be spectro-nnn.conf and cntl-mmm.conf where nnn is the spectrograph unit number and mmm is the controller number.
- Look at the spectro-nnn.conf file and verify that the controller-id value matches the delivered controller.
- Edit the file virus_server.conf,
- Add spectro-nnn.conf to the list spectrograph-configs if it is not already in the list,
- Add cntl-mmm.conf to the list controller-configs if it is not already in the list.
- Commit the changes to virus_server.conf to the svn repository into trunk.
- Install the new configurations in the operational directories,
- Use the het_release script with the instruments_config target
- I have a script in /home/liberty/jrf/HetDevel/jrfwork/doinstall that does this but you will have to change the user name for your account on hetdex-pr.as.utexas.edu.
- The install process requires your password to run sudo during the installation process.
- See DevelInstall for more information about the installation process.
- To clear out the ram disk on lrs2 or vdas
- insure data directory in /hetdata has owner hetdex:hetdex and group write permission
- run as hetdex on lrs2 or vdas $HET_SRC_ROOT/camra/testing/proxy-pivot-[virus|lrs2]-data.sh `find /mnt/camra_ramdisk/ -name "*.fits"`
- Reset the PCIe interface cards if
- the ccd array failed during an exposure
- if vdas hangs during reboots at the Initializing PCIe step
Attachments (1)
-
internal_clock.jpg
(66.1 KB) -
added by admin 4 years ago.
Virus image if spectrograph has the internal clock jumper installed
Download all attachments as: .zip