Changes between Version 55 and Version 56 of HetProcedures/HighSpeedBib

Timestamp:

Sep 24, 2019 9:35:07 AM (5 years ago)

Author:

stevenj

Comment:

--

HetProcedures/HighSpeedBib

@@ -107 +107 @@
 Make sure the DIMM is running the whole time.
 
-1. Select a ~8th magnitude star (i.e., from the f9 catalog) and run do_shuffle to put it on the  BIB using IFU=555. Choose a star which transits 20 minutes from when you start the test.   For good seeing use 9.5-9.9 and for bad seeing select 9.0-9.5.
+1. Select a ~9th magnitude star (i.e., from the f9 catalog) and run do_shuffle to put it on the  BIB using IFU=555. Choose a star which transits 20 minutes from when you start the test.   For good seeing use 9.5-9.9 and for bad seeing select 9.0-9.5.
 
    {{{ target_setup -cat f9 5897 E -ifu 555 -to }}}
@@ -132 +132 @@
 8. Start displaying images by either clicking on the [[Image(VimbaViewer_Freerun.png)]] button, or typing Ctrl-F, or selecting the menu item `Camera->Freerun`. Make sure the star is not saturating (you can adjust the image scaling ("Gain"), and it should not be blown out at the center). As long as this looks good, continue with these steps. If star is too bright (saturating) or too faint (not visible at all), you may need to reconsider your choice of star or the weather conditions.  Look at the histogram to see if you are saturated.  
 
-   [[Image(image001.jpg)]]
+   [[Image(image001.jpg, 400px))]]
 
 9. If you are happy with this star, then set the parameters for an image series by selecting `File->Image Series Options...` from the File menu. [[Image(VimbaViewer_Save.png)]]