Changes between Version 17 and Version 18 of HetProcedures/HighSpeedCWFS

Timestamp:

Nov 24, 2019 8:46:13 AM (4 years ago)

Author:

stevenj

Comment:

--

HetProcedures/HighSpeedCWFS

@@ -14 +14 @@
 4. Get on this trajectory with "go_next". Ask the TO to setup on the IHMP position from wiki (handshake from ACQ to a guider).
 
-5. Activate a WFS.
+5. Center and activate a WFS.
 
 6. Make sure all probes are storing images.
@@ -20 +20 @@
 7. Ask the TO to retract the ACQ mirror and insert the CWFS mirror.
 
-8. Be sure that the "process" and "store" checkboxes are enabled on the "CWFS control" tab in the TCS GUI.
+8. Offset from IHMP to CWFS with {{{ syscmd -T 'offset_trajectory(dx_ang=-5.1, dy_ang=-3.9, adjust_probes="true")'}}}
 
-9. Offset from IHMP to CWFS with {{{ syscmd -T 'offset_trajectory(dx_ang=-5.1, dy_ang=-3.9, adjust_probes="true")'}}}
+9. Try using a 1-5s exposure time for CWFS, and be sure that the "process" and "store" checkboxes are enabled on the "CWFS control" tab in the TCS GUI.
 
-10. Look at CWFS x and y offsets and refine the offset above with any residuals until offsets less than 0.3".
+10. Look at CWFS x and y offsets (in the CWFS metrology tab) and adjust the offset command (listed above) until offsets are less than 0.3".
 
 11. Once the CWFS is well-centered, run this command to allow !VimbaViewer to take control of the CWFS:
@@ -47 +47 @@
    [[Image(vimba_roi.png, 400px)]]
 
-16. Click "play" icon to see images. Click "stop" then click File --> Save Image As and save the most recent image as tiff somewhere easy like {~/test.tiff}. You can open this with {{{ds9 -photo test.tiff}}} to check for saturation.
+16. Click "play" icon to see images, then click "stop". To check for saturation, click File --> Save Image As and save the most recent image as tiff somewhere easy like {~/test.tiff}. You can open this with {{{ds9 -photo test.tiff}}} to see how it looks. Adjust exposure time if necessary.
 
 
--15. If you are happy with this star, then set the parameters for an image series by selecting `File->Image Series Options...` from the File menu. You may have to create the {{{CWFS/}}} directory in the night's directory.
+17. Set the parameters for an image series by selecting `File->Image Series Options...` from the File menu. You may have to create the {{{CWFS/}}} directory in the night's directory.
 
   {{{ Format = .tiff }}}