Changes between Version 21 and Version 22 of HetProcedures/RA/DIMM
- Timestamp:
- Dec 2, 2019 3:53:37 PM (4 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
HetProcedures/RA/DIMM
v21 v22 32 32 * turn flip mirror to the CCD position and turn off the reticle 33 33 * on the telescope hand paddle, set the speed to "guide" (#1) 34 * sync the telescope with the current requested star by holding down the enter button for 5 seconds, then release. It should beep at you and say it sync'd 34 * sync the telescope with the current requested star by holding down the enter button for 5 seconds, then release. It should beep at you and say it sync'd when you press enter again. 35 35 * on the DIMM software, click the "Start Seeing Measurements" button 36 36 * '''Note:''' do not change the binning or exposure times or any other parameters as these may impact the seeing values that are determined.
