Changes between Version 22 and Version 23 of HetProcedures/RA/DIMM

Timestamp:

Dec 14, 2019 1:29:15 AM (4 years ago)

Author:

stevenj

Comment:

--

HetProcedures/RA/DIMM

@@ -1 +1 @@
 = DIMM Procedures =
+
+   * [wiki:HetProcedures/RA/DIMM#startdimm Start of night ]
+   * [wiki:HetProcedures/RA/DIMM#shutdowndimm End of night ]
+   * [wiki:HetProcedures/RA/DIMM#video Accessing video]
+   * [wiki:HetProcedures/RA/DIMM#tips Tips and advice]
+   * [wiki:HetProcedures/RA/DIMM#moving Moving DIMM from the control room]
+
 
 == Start of the Night == #startdimm
@@ -38 +45 @@
  *  once good seeing measurements are coming in, turn off the computer monitor using the small fob next to the keyboard, close the keyboard tray, and close the door behind you
 
-=== If the DIMM box gets too big due to winds or very bad seeing you can reset this by going under ''Settings'' and hit ''Apply'' without making any changes ===
+
 
 == End of the Night == #shutdowndimm
@@ -61 +68 @@
  * Lock the door and close firmly (knee optional)
 
-=== Changing the DIMM star with the AUTOSTAR software package ===
+
+
+
+=== Accessing DIMM video stream from RA desk === #video
+
+As of 13 Dec 2019, you can tune in to the DIMM video camera from the RA desk using the top monitor. Change its input source (using the touch-buttons on the bottom right edge) to "Composite", and you will see video from the camera mounted on the side of the DIMM telescope. Change the input to "DVI-D 2" and it will return to the normal MCS desktop screen.
+
+
+
+=== Tips and troubleshooting: === #tips
+
+ If the DIMM enclosure roll-up roof will not open/close, try re-seating the blue-ended cable which plugs into the grey electrical box where those buttons are mounted.
+
+ If the DIMM box gets too big due to winds or very bad seeing you can reset this by going under ''Settings'' and hit ''Apply'' without making any changes ===
+ 
+
+
+
+=== Changing the DIMM star with the AUTOSTAR software package ===  #moving
 
 {{{
@@ -98 +123 @@
 
 }}}
-
-
-=== Troubleshooting: ===
-
- If the DIMM enclosure roll-up roof will not open/close, try re-seating the blue-ended cable which plugs into the grey electrical box where those buttons are mounted.
-
-
-