Changes between Version 153 and Version 154 of HetProcedures/RA/hpf

Timestamp:

Dec 11, 2018 1:19:53 AM (5 years ago)

Author:

shetrone

Comment:

--

HetProcedures/RA/hpf

@@ -284 +284 @@
 Make sure ACAM and FCU are retracted.
 
-Starting ~3min after sunset:
+Starting at or just before sunset:
 
   * tims detect pyhxrg:SetObstype:Cal
@@ -294 +294 @@
 
 After that finishes, close the PFIP shutter before attempting LRS2 flats.
-
 
 Can view images with showhpfspec (but needs 2 readouts)
@@ -325 +324 @@
 
 
-* The RA performing Ops in the afternoon will typically start the eveening HPS cal set. This will take about 1h10m to complete. 
+* The RA performing Ops in the afternoon will typically start the eveening HPS cal set. This will take about 44m to complete. 
 {{{
 [hpf@hpfserver CalScripts] cd /home/hpf/Scripts/InstConfig/CalScripts
@@ -331 +330 @@
 }}}
 
-If you don't have the 1h10m minutes for the full PartA cals just run the [[br]]
-{{{ ./matt_shortflatwave.sh }}} 36 minutes[[br]]
-or [[br]]
+If you don't have the 44m minutes for the full PartA cals just run the [[br]]
 {{{ ./matt_shortflats.sh }}}  22 minutes[[br]]
 or [[br]]
 {{{ ./matt_wave.sh }}} 14 minutes[[br]]
-depending no how long you have before sunset.    The most critical cals are the wavelength (wave) cals.
-
-
+depending no how long you have before sunset.    '''The most critical cals are the wavelength (wave) cals.'''
 
 * The night RA will check that the job is complete by confirming that the command prompt has returned in the HPF command window. If the job is still in execution, we'll see a sequence of integers being written to this window. Also, if the script is still executing, we'll see update message appearing in the HPF monitor window. 
@@ -349 +344 @@
 }}}
 
-* Combining A+C cals takes 1h 53m, and could be initiated as part of the afternoon OPS if dome stays closed.
+* Combining A+C cals takes 1h 27m, and could be initiated as part of the afternoon OPS if dome stays closed.
 
 * *NOTE on order of A,C cals*: