Changes between Version 191 and Version 192 of HetProcedures/RA/hpf

Timestamp:

Jul 17, 2019 4:55:14 PM (5 years ago)

Author:

shetrone

Comment:

--

HetProcedures/RA/hpf

@@ -45 +45 @@
 === Possible script shortcut to setting up with the regular mode on the HR fiber for HPF ===
 
- *  Send the target from shuffle using either the IFU id 600 for regular setup or IFU id 603 for direct setups.
+ *  Send the target from shuffle using either the IFU id 600 for regular setup or IFU id 603 for direct setups.  Note if you need to use the side CB IFU use id 610.
  *  make sure the pfip shutter is open
  *  open a connection to htcs in an xterm or console window
@@ -57 +57 @@
 Setting up for an HPF target follows the following procedures:
 
-  *  use target_setup and either IFU 600 (normal setup) or 603 (direct setup)
+  *  use target_setup and either IFU 600 (normal setup) or 603 (direct setup)   Note if you need to use the side CB IFU use id 610.
       * Example {{{target_setup 1183 E -to -ifu 600}}}
   *  Change the acam filter to icd to /home/hpf/HPFics