Changes between Version 248 and Version 249 of HetProcedures/RA/hpf

Timestamp:

Jun 29, 2022 2:49:05 AM (23 months ago)

Author:

stevenj

Comment:

--

HetProcedures/RA/hpf

@@ -543 +543 @@
 In the TIMS HET window do a '''cntrl-a n''' about five times to move to screen 2 which is the TIMS Calib screen. Note that we must hit cntl-a then hit the n (for next srccen). This full sequence is repeated to go to the next screen.  The screen we usually operate in has the heading name "Screen 4: HPF HET Client". To fix the probelm of Q-data missing from the HPF headers (for example) we need the screen that is labeled "Screen 3: HPF TCS Relay".  The screen we start from is named "Screen 4: HPF HET Client". The screen we want to end up at is   It should have a prompt.  If it does not you may need to do a few cntrl-c to kill any hanging processes.
 
+The TCS Relay screen should look something like this:
+
+[[Image(hpf_tcs_relay.jpg, 300px)]]
+
 In the TIMS Calib screen you should do an up arrow and see the {{{ python -m TIMS.clients.tims_calib }}} command which restarted the Calib client.   Wait a few minutes for it to finish.