Changes between Version 204 and Version 205 of HetProcedures/RA/overview


Ignore:
Timestamp:
Oct 16, 2018 9:39:24 PM (6 years ago)
Author:
sir
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • HetProcedures/RA/overview

    v204 v205  
    77      to check LRS2 VG pressure. If got 999999 that means that VG need to be
    88      enabled and one needs to wait 10 minutes before read out pressure
    9     * turn off ION PUMP and VG using the command {{{ ipvg off }}} confirm IP is off on APC GUI.  The VG is only disabled not turned off with this command.  If you need to do this with low level commands you can turn off the IP on the APC directly but Important!!!! Leave LRS2 VacuumGauge on on APC GUI.
     9    * turn off ION PUMP, VG and VIRUS V309_IONPump using the command {{{ ipvg off -V }}} confirm IP is off on APC GUI.  The VG is only disabled not turned off with this command.  If you need to do this with low level commands you can turn off the IP on the APC directly but Important!!!! Leave LRS2 VacuumGauge on on APC GUI.
    1010      To disable or enable VG use commands
    1111{{{
    … …  
    1313syscmd -l 'enable_pressure_gauges()'   # should be run RA in the morning
    1414}}}
     15{{#comment
    1516    * turn off the VIRUS Ion pumps call V309_IONPump on the APCgui
     17}}}
    1618    * check instruments temperatures
    1719    * check IFU's percentage power (Left and Right Pwr %).   Adjust any temperatures as needed.