Changes between Version 218 and Version 219 of HetProcedures/RA/overview

Timestamp:

Dec 7, 2018 10:04:01 PM (5 years ago)

Author:

shetrone

Comment:

--

HetProcedures/RA/overview

@@ -7 +7 @@
       to check LRS2 VG pressure. If got 999999 that means that VG need to be
       enabled and one needs to wait 10 minutes before read out pressure
-    * turn off ION PUMP, VG and VIRUS V309_IONPump using the command {{{ ipvg -V off }}} confirm IP is off on APC GUI.  The VG is only disabled not turned off with this command.  If you need to do this with low level commands you can turn off the IP on the APC directly but Important!!!! Leave LRS2 VacuumGauge on on APC GUI.
+    * turn off ION PUMP, VG and VIRUS V309_IONPump using the command {{{ ipvg off -V }}} confirm IP is off on APC GUI.  The VG is only disabled not turned off with this command.  If you need to do this with low level commands you can turn off the IP on the APC directly but Important!!!! Leave LRS2 VacuumGauge on on APC GUI.
       To disable or enable VG use commands
 {{{
@@ -74 +74 @@
 Turn off the LRS2 ion pump and Vacuum Gauge
 
-  * In an mcs window do a {{{ipvg -V off }}}
+  * In an mcs window do a {{{ipvg off -V  }}}
 
 Take test exposures: