Changes between Version 16 and Version 17 of HetProcedures/TO/pvtwilight

Timestamp:

Dec 21, 2018 10:57:03 PM (5 years ago)

Author:

ccrowe

Comment:

--

HetProcedures/TO/pvtwilight

@@ -1 +1 @@
 == Procedure for Blue Sky PV Images ==
+* Turn on the PV camera and restart the PAS server
 * Point structure and dome to north (Azimuth: 0)
 * Set tracker to center preset position
@@ -9 +10 @@
 * Adjust exposure time till the "Blue" PV image flux for the mirror segments is approximately 190 counts
 * Turn PV pipeline off, leave start images on and run command '~/justen/pvtwilightOnSph' in a terminal on jove
-* Watch "Blue" images as they come out to see what the flux is, if the flux drops below 150 or hits 255 adjust exposure while tracker is moving to the next position '''NOTE: If any image has flux of 255(over-exposed) or is below 150(under-exposed), another set will need to be taken'''
-* When the terminal prompts "Done" then it's finished taking the PV images. Once it does this, send an email to mirror@het.as.utexas.edu and CC Justen saying that the images are done.
+* Watch "Blue" images as they come out to see what the flux is, if the flux drops below 150 or hits 255 adjust exposure while tracker is moving to the next position 
+  
+  '''NOTE: If any image has flux of 255(over-exposed) or is below 150(under-exposed), another set will need to be taken'''
+* When the terminal prompts "Done" then it's finished taking the PV images. IF there's no need to redo the images, turn off the PV camera and send an email to mirror@het.as.utexas.edu and CC Justen saying that the images are done
 
-The whole process should take about 13-15 minutes
+The whole process should take about 13-15 minutes, if there are no under or over-exposed images.
 
 == On sphere locations for HS PV test==