Changes between Version 5 and Version 6 of HetProcedures/TO/pvtwilight


Ignore:
Timestamp:
Oct 13, 2018 8:03:10 AM (6 years ago)
Author:
justenp
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • HetProcedures/TO/pvtwilight

    v5 v6  
    44* Make sure SAMS is on and making corrections
    55* Open dome shutter, Louvers should be left closed
    6 * Retract ACAM mirror if deployed then deploy PV/CWFS mirror, set camera to PV
     6* Retract ACAM mirror if deployed, then deploy PV/CWFS mirror, set CWFS/PV position to PV
     7* Uncheck the "Store Images" box on PV camera
    78* Start Pipeline and images on PV camera
    8 * Adjust exposure time till flux in PV image of mirror segments is approximately 200 counts
     9* Adjust exposure time till the "Blue" PV image flux for the mirror segments is approximately 200 counts
    910* Turn PV pipeline off, leave start images on and run command 'pvtwilight' in a terminal on jove
    10 * Watch images as they come out to see what the flux is if the flux drops below 150 or hits 255 adjust exposure while tracker is moving to the next position
     11* Watch "Blue" images as they come out to see what the flux is if the flux drops below 150 or hits 255 adjust exposure while tracker is moving to the next position
    1112* '''If any image has flux of 255 and is over exposed, another set will need to be taken'''
    1213
    1314== On sphere locations for HS PV test==
    14 *mountTest -F
     15* mountTest -F
    1516* h for help
    1617* q to quit
    1718* Enter in a # between 1 - 97 to go to different points on sphere
    18 *