Changes between Version 8 and Version 9 of HetProcedures/TO/pvtwilight


Ignore:
Timestamp:
Dec 1, 2018 4:59:11 AM (5 years ago)
Author:
justenp
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • HetProcedures/TO/pvtwilight

    v8 v9  
    55* Open dome shutter, Louvers should be left closed
    66* Retract ACAM mirror if deployed, then deploy PV/CWFS mirror, set CWFS/PV position to PV
    7 * Uncheck the "Store Images" box on PV camera (So that you arent saving a bunch of images while you are setting exposure time).
     7* Uncheck the "Store Images" box on PV camera (So that you aren't saving a bunch of images while you are setting exposure time)
    88* Start Pipeline and images on PV camera
    9 * Adjust exposure time till the "Blue" PV image flux for the mirror segments is approximately 200 counts
    10 * Turn PV pipeline off, leave start images on and run command 'pvtwilight' in a terminal on jove
     9* Adjust exposure time till the "Blue" PV image flux for the mirror segments is approximately 190 counts
     10* Turn PV pipeline off, leave start images on and run command '~/justen/pvtwilightOnSph' in a terminal on jove
    1111* Watch "Blue" images as they come out to see what the flux is, if the flux drops below 150 or hits 255 adjust exposure while tracker is moving to the next position
    1212'''NOTE: If any image has flux of 255 and is over exposed or is below 150 and underexposed, another set will need to be taken'''