Changes between Version 1 and Version 2 of NightOperations/OPSManaul/Finishing_Up


Ignore:
Timestamp:
Oct 7, 2018 11:13:59 PM (6 years ago)
Author:
nathan
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • NightOperations/OPSManaul/Finishing_Up

    v1 v2  
    11= Finishing Up
    2 1.) Point the Structure and the Dome at 0 degrees and move the filter for Guide cam 2 and B (found on the PFIP/FCU status) to prepare for evening sky flats.
     21.) Point the Structure and the Dome at 0 degrees and move the filter for Guide cam 1 and 2 and B (found on the PFIP/FCU status) to prepare for evening sky flats.
    33
    442.) Check the weather. If the dome air conditioning was not effective (or too effective) during the day you may need to open the louvers earlier than sunset to get the dome temperature to match to the outside temperature. Constantly keep an eye on the internal vs. external temperature so that the night TO will have usable truss temperatures for their first of the night stack. The day ops set the temperature for internal based off what the NOAA forecasting site predicts, but weather can change. If it gets dramatically warmer or cooler than predicted, you can adjust the AHU's set point on the tracer webpage or if the conditions are right you can open the louvers a bit to flush out the dome. When opening the louvers during the day, move the switch to individual and open the ones in a safe location away from sunlight so as not to get sunlight on the mirror.