Changes between Version 4 and Version 5 of NightOperations/OPSManaul/Getting_Started
- Timestamp:
- Oct 7, 2018 10:46:38 PM (6 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
NightOperations/OPSManaul/Getting_Started
v4 v5 13 13 6.) Check the SWAG and AHU numbers and note the numbers in the OPS checklist along with your name and the Day Ops name. 14 14 15 7.) Start the TO Launcher by clicking the TO Launcher icon on the task bar of the desktop. Go to '''Operations''' > '''Start APC GUI''' 15 === Restarting PFIP and the compactRIO 16 1.) Start the TO Launcher by clicking the TO Launcher icon on the task bar of the desktop. Go to '''Operations''' > '''Start APC GUI''' 16 17 17 8.) From in the APC window under the PFIP column, power off PFIPCntrlr and wait 15 seconds before turning it back on. From '''TO Launcher''' > '''Operations''' > '''TCS Servers''' menu restart the '''PFIP''' server.18 2.) Go to the APC GUI and locate the power button for the compactRIO under the PFIP section. It should be listed PFIPContrlr. 18 19 19 9.) Start or Restart '''TO Launcher''' > '''Start TCS GUI''' and in the '''PFIP/FCU Control /Status''' window hit the '''Power On All''' button to turn on all cameras.20 3.) Power it off and wait 15 seconds before turning it back on again. 20 21 21 10.) From '''TO Launcher''' > '''Operations''' > '''TCS Servers''' restart '''All Servers'''.22 4.) Wait for all the buttons on the PFIP/FCU control/status tab to power off (make sure to start TCS GUI). Once everything has powered off, go ahead and power them on again. 22 23 23 11.) Head out to the Krabbenhut for the next part of OPS. (See Figure below for location of the Krabben Hut). 24 5.) When everything has been powered on, restart the TCS servers and the TCS GUI. 25 26 6.) Head out to the Krabbenhut for the next part of OPS. (See Figure below for location of the Krabben Hut). 24 27 [[br]] 25 28