Changes between Version 5 and Version 6 of NightOperations/OPSManaul/Setup_Desktop

Timestamp:

Oct 7, 2018 10:43:12 PM (6 years ago)

Author:

nathan

Comment:

--

NightOperations/OPSManaul/Setup_Desktop

@@ -1 +1 @@
 = Starting Jove
 == Starting Up Left Desktop
-1.) On monitors 0.0 & 0.1 start the TO launcher (Applications > TO launcher)
+1.) On monitors 0.0 & 0.1 start the TO launcher (Applications > TO launcher) if you have not already.
 
-2.) Start the APC Gui (TO Launcher > Operations > Start APC Gui)
+2.) Start the APC Gui (TO Launcher > Operations > Start APC Gui) if you have not already.
 
 3.) In the TO launcher you will need to start up SCS, SAMS, MARS and HEFI
@@ -22 +22 @@
 
 == Setting Up Right Desktop
-1.) On monitors 0.2 & 0.3 start the TO launcher
+1.) On monitors 0.2 & 0.3 start the TO launcher if you have not already
 
 2.) Startup the TCS GUI
@@ -63 +63 @@
   '''Note''': If you have to leave the facility for some reason and the night TO is not there yet, do not leave SAMS in open loop form. Place it on standby with SCS moved to none.
 
-=== Restarting PFIP and the compactRIO
-1.) Go to the APC GUI and locate the power button for the compactRIO under the PFIP section. It should be listed PFIPContrlr.
-
-2.) Power it off and wait 15 seconds before turning it back on again.
-
-3.) Wait for all the buttons on the PFIP/FCU control/status tab to power off. Once everything has powered off, go ahead and power them on again.
-
-4.) When everything has been powered on, restart the servers and the TCS GUI.