Changes between Version 4 and Version 5 of TOManual/stack1

Timestamp:

Dec 21, 2018 10:33:50 PM (5 years ago)

Author:

ccrowe

Comment:

--

TOManual/stack1

@@ -68 +68 @@
       11) Inform the RA that you are about 5 minutes from a completed stack.
 
+      12) Go back into HEFI and take the focus curve. Adjust if needed.
+
+      13) Once the focus curve and HEFI numbers come back good, press the Image Sequence button on HEFI. Change the name to sequenceX where X is the number of the stack, e.g. sequence2 for the 2nd stack of the night. Change start box to 1, count to 30, delay to 2. Hit start and wait for sequence to say IDLE.
+
+      14) Once the sequence has finished, go to the Wavescope terminal and enter 'Hanshin30'. Once that is completed, inform the RA that you are done with stacking.
+
 ==