Changes between Version 5 and Version 6 of TOManual/stack1


Ignore:
Timestamp:
Dec 21, 2018 11:55:33 PM (5 years ago)
Author:
ccrowe
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • TOManual/stack1

    v5 v6  
    6363 
    6464
    65       10) Save position in SCS and SAMS.  Once the final iteration has settled (RSE on Tip tilt ~ 0.10, T/T error ~.10) , move SAMS from Operate to Standby mode.  Click the Set Reference and select “New Reference Preserve Mode” and OK when asked.  When the mode is not grayed any more, move from Standby to Operate. You should witness the TRSE (green line) drop significantly.  When SAMS begins to level out move over to SCS, and click the Save Pos button.  You may have to wait until SCS is done “moving.”  Save the file that appears highlighted. 
     65      10) Save position in SCS and SAMS.  Once the final iteration has settled (RSE on Tip tilt ~ 0.10, T/T error ~.10), move SAMS from Operate to Standby mode.  Click the Set Reference and select “New Reference Preserve Mode” and OK when asked.  When the mode is not grayed any more, move from Standby to Operate. You should witness the TRSE (green line) drop significantly.  When SAMS begins to level out move over to SCS, and click the Save Pos button.  You may have to wait until SCS is done “moving.”  Save the file that appears highlighted. 
    6666     
    6767 
    68       11) Inform the RA that you are about 5 minutes from a completed stack.
    69 
    70       12) Go back into HEFI and take the focus curve. Adjust if needed.
    71 
    72       13) Once the focus curve and HEFI numbers come back good, press the Image Sequence button on HEFI. Change the name to sequenceX where X is the number of the stack, e.g. sequence2 for the 2nd stack of the night. Change start box to 1, count to 30, delay to 2. Hit start and wait for sequence to say IDLE.
    73 
    74       14) Once the sequence has finished, go to the Wavescope terminal and enter 'Hanshin30'. Once that is completed, inform the RA that you are done with stacking.
     68      11) If there is time, inform the RA that you are about 5 minutes from a completed stack and go to [wiki:HetProcedures/TO/stack2 measure the stack].
    7569
    7670==