Changes between Version 3 and Version 4 of TOManual/stack2


Ignore:
Timestamp:
Dec 22, 2018 3:31:19 AM (5 years ago)
Author:
ccrowe
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • TOManual/stack2

    v3 v4  
    34348) Once you're finished with the iterations, press the image sequence button on HEFI. In the window that pops up, change the name of the sequence to sequenceX where X is the number of the stack (e.g. sequence2 for the second stack, etc.). Then change the number in the start box to 1, count to 30, and delay to 2. Press start and wait for the window to say 'IDLE'.
    3535
    36 9) Once the sequence window says 'IDLE' then go over to the wavescope terminal. Put in 'Hanshin30' and watch the numbers as they ouput onto the screen to make sure they're good.
     369) Once the sequence window says 'IDLE' then go over to the wavescope terminal. Put in 'Hanshin 30' and watch the numbers as they ouput onto the screen to make sure they're good.
    3737 
    3838