Changes between Version 4 and Version 5 of TOManual/stack2


Ignore:
Timestamp:
Dec 22, 2018 3:37:42 AM (5 years ago)
Author:
ccrowe
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • TOManual/stack2

    v4 v5  
    3232MARS FOCUS.  There are two places to read these values.  One is in the window that was calculating the focus curve and the other is in the Hefi Focus Curve GUI on the bottom.  Take the better of the two.  An ee50 below 0.65 is satisfactory.  If that value is above 0.65 and the weather conditions were not binding, you should go back and do a few more iterations if there is time. NOTE this time as the FINISHED TIME.  (If this is the first stack of the night, the end time should be before 18 degree).
    3333
    34 8) Once you're finished with the iterations, press the image sequence button on HEFI. In the window that pops up, change the name of the sequence to sequenceX where X is the number of the stack (e.g. sequence2 for the second stack, etc.). Then change the number in the start box to 1, count to 30, and delay to 2. Press start and wait for the window to say 'IDLE'.
     348) Once you're finished with the iterations, press the image sequence button on HEFI (leave light in and on low). In the window that pops up, change the name of the sequence to sequenceX where X is the number of the stack (e.g. sequence2 for the second stack, etc.). Then change the number in the start box to 1, count to 30, and delay to 2. Press start and wait for the window to say 'IDLE'.
    3535
    36 9) Once the sequence window says 'IDLE' then go over to the wavescope terminal. Put in 'Hanshin 30' and watch the numbers as they ouput onto the screen to make sure they're good.
    37  
     369) Once the sequence window says 'IDLE' take out the HEFI mirror and turn off the light. Then go over to the wavescope terminal. Put in 'Hanshin 30' and watch the numbers as they ouput onto the screen to make sure they're good. The script will automatically open the AOA reference and HET shutters. When the AOA shutter is open the numbers should be between 140 and 150 and the AOA numbers should be around 180.
    3837
    393810) Turn off the HEFI light source, close the CCAS shutter, move HEFI mirror OUT and