Changes between Initial Version and Version 1 of TOManual/stack3

Timestamp:

Jul 25, 2018 3:00:45 AM (6 years ago)

Author:

ebevins

Comment:

--

TOManual/stack3

@@ +1 @@
+== Quick Stack Guide ==
+
+
+1. Tracker Right, CCAS open
+
+
+2. Center array in Hefi, (mirror in, light high)
+
+
+3.  Switch to AOA cam 2, Hefi out, light off
+
+
+4.  Show spot image/ open HET reference in MARS
+
+
+5.  Center array in AOA spot image 
+
+
+6.  DMI stage in take and adjust focus for DMI reading 
+
+
+7.  Begin iterations in AOA with command s1. For a quick stack keep an eye on time. Typically  1 – 2 iterations   on either side is enough for a quick stack. 
+
+
+8.  Once the right side is done, move tracker to the left side. 
+
+
+9.  Begin iterations, again 1 - 2 or however much time you have available.
+
+ 
+10.  Move the tracker back to the right side. 
+
+
+11. IF there is time: Hefi mirror in, light source low, focus spot
+
+
+12. Measure stack
+
+
+13. Record stack, save positions in SAMS and SCS
+
+
+14.  If short on time: Save positions, do not record time, HEFI mirror out and light off. 
+
+
+15.  Close CCAS