== Quick Stack Guide ==


1. Tracker Right, CCAS open


2. Center array in Hefi, (mirror in, light high)


3.  Switch to AOA cam 2, Hefi out, light off


4.  Show spot image/ open HET reference in MARS


5.  Center array in AOA spot image 


6.  DMI stage in take and adjust focus for DMI reading 


7.  Begin iterations in AOA with command s1. For a quick stack keep an eye on time. Typically  1 – 2 iterations   on either side is enough for a quick stack. 


8.  Once the right side is done, move tracker to the left side. 


9.  Begin iterations, again 1 - 2 or however much time you have available.

 
10.  Move the tracker back to the right side. 


11. IF there is time: Hefi mirror in, light source low, focus spot


12. Measure stack


13. Record stack, save positions in SAMS and SCS


14. Take image sequence


15. Do Hanshin30 in wavescope terminal


16. If short on time: Save positions, do not take image sequence or Hanshin, do not record time, HEFI mirror out and light off. 


17. Close CCAS